Rotwerk X0
The compact Rotwerk X0 drilling and milling machine is suitable for the precise machining of workpieces made of metal, plastic and steel. The machine is ideal for machining smaller workpieces where dimensional accuracy and detail are important. The digital drilling and milling depth display provides accurate values. The display is in 1/100 mm. The zero point setting allows direct reading of the drilling or milling depths.
The switchable micro-feed enables very fine milling work with high precision. The drilling and milling machine is designed for drills up to 10 mm and for milling cutters up to 6 mm. With the two-stage speed range, which is infinitely variable up to max. 7,000/min (revolutions), precise drilling of even the smallest diameters is possible. The Rotwerk cross table (Art. 19100 - not included!) complements the machine with the X- and Y-axis (not included). Due to its small and compact design, this machine tool finds its place even in the smallest workshop. It does not have to be fixed to the workbench and can therefore be easily tidied up after work.
| Nennspannung | 230 Volt~ / 50 Hz |
| Leistungsaufnahme | 150 Watt |
| Drehzahl Stufe I | 0 - 4.000 min-1 |
| Stufe II | 0 - 7.000 min-1 |
| Bohrfutter Spannbereich | 0,6 - 6 mm |
| Bohrfutteraufnahme | B10 |
| Bohrleistung (Stahl, Alu, Holz) | 6 mm |
| Bohrtiefe | 40 mm |
| Ausladung | 165 mm |
| Säulendurchmesser 30 mm | |
| max. Abstand Bohrtisch - Bohrfutter | ca. 200 mm |
| Höhe | 470 mm |
| Abmessung Maschinenfuß | 275 x 165 mm |
| Schalldruckpegel | 72 db(A) |
| Gewicht | 15 kg |
| Artikel Nummer | 19900 |
| EAN-Code | 4026863199008 |
Rotwerk EFM 200DS
Drilling and milling machine for machining workpieces made of metal, plastic or similar materials.
The EFM 200 DS is specially designed for finger cutters up to ø 16 mm and face milling cutters up to ø 30 mm. The milling head can be tilted on both sides up to a maximum of 45°. This makes it easy to mill chamfers, angled surfaces or grooves. Due to the special fine feed on the milling head, the desired milling depth can be achieved very precisely. The height adjustment of the milling head is 180 mm. The work table can be moved 220 mm in the X-axis and 100 mm in the Y-axis.
For high forces in the lower speeds, two mechanical speed levels can be selected.
For machining non-ferrous metals and plastics, work can be carried out in the upper speed range up to 2200 min-1.
The control is decisive for the performance of a machine tool. Therefore, there are no compromises with the EFM 200 DS. The speed electronics, developed and produced by the German manufacturer Telegärtner, ensure powerful running at all speeds.
| Nennspannung | 230 Volt~ / 50 Hz |
| Leistungsaufnahme | 350 W |
| Arbeitstisch (LxB) | 390 x 95 mm (mit 12 mm T-Nuten) |
| max. Tischverstellung x-Achse | 220 mm |
| max. Tischverstellung y-Achse | 100 mm |
| max. Höhensverstellung | 180 mm |
| max. Neigungswinkel | -45° bis +45° |
| Drehzahlbereich I | stufenlos 150 - 1.100 min-1 |
| Drehzahlbereich II | stufenlos 300 - 2.500 min-1 |
| Zahnkranzbohrfutter | 1 - 13 mm |
| max. Fingerfräserdurchmesser | 16 mm |
| max. Stirnfräserdurchmesser | 30 mm |
| Morsekegel der Arbeitsspindel | MK 3 |
| Versandgewicht | ca. 57 kg |
Rotwerk EFM 200BL
Drilling and milling machine for machining workpieces made of metal, plastic or similar materials.
The EFM 200 BLplus is a further development of the EFM 200 DS and differs mainly in that it has a more powerful brushless motor and a larger cross table (460 x 120 mm).
The new milling motor eliminates the somewhat noisy gearbox for changing the speed levels. It is replaced by a quiet and hard-wearing belt drive, which is characterised by much smoother running. This makes the machine even more maintenance-free and less prone to breakdowns.
It is specially designed for finger cutters up to ø 16 mm and face cutters up to ø 30 mm. The milling head can be swivelled on both sides up to a maximum of 45°. This makes it easy to mill chamfers, angled surfaces or grooves. Due to the special fine feed on the milling head, the desired milling depth can be achieved very precisely. The height adjustment of the milling head is 180 mm. The work table can be moved 300 mm in the X-axis and 130 mm in the Y-axis.
| Nennspannung | 230 Volt~ / 50 Hz |
| Leistungsaufnahme | 500 W |
| Arbeitstisch (LxB) | 460 x 120 mm (mit 12 mm T-Nuten) |
| max. Tischverstellung x-Achse | 300 mm |
| max. Tischverstellung y-Achse | 130 mm |
| max. Höhensverstellung | 180 mm |
| max. Neigungswinkel | -45° bis +45° |
| Drehzahlbereich | stufenlos 100 - 2.500 min-1 |
| Zahnkranzbohrfutter | 3 - 13 mm |
| max. Bohrleistung | 16 mm |
| Fräsleistung Schaftfräser | 20 mm |
| Fräsleistung Stirnfräser | 45 mm |
| Morsekegel Arbeitsspindel | MK 3 |
| Abmessungen (B x H x T) | ca. 520 x 760 x 580 mm |
| Gewicht | ca. 60 kg |
The compact Rotwerk X0 drilling and milling machine is suitable for the precise machining of workpieces made of metal, plastic and steel. The machine is ideal for machining smaller workpieces where dimensional accuracy and detail are important. The digital drilling and milling depth display provides accurate values. The display is in 1/100 mm. The zero point setting allows direct reading of the drilling or milling depths.
The switchable micro-feed enables very fine milling work with high precision. The drilling and milling machine is designed for drills up to 10 mm and for milling cutters up to 6 mm. With the two-stage speed range, which is infinitely variable up to max. 7,000/min (revolutions), precise drilling of even the smallest diameters is possible. The Rotwerk cross table (Art. 19100 - not included!) complements the machine with the X- and Y-axis (not included). Due to its small and compact design, this machine tool finds its place even in the smallest workshop. It does not have to be fixed to the workbench and can therefore be easily tidied up after work.
| Nennspannung | 230 Volt~ / 50 Hz |
| Leistungsaufnahme | 150 Watt |
| Drehzahl Stufe I | 0 - 4.000 min-1 |
| Stufe II | 0 - 7.000 min-1 |
| Bohrfutter Spannbereich | 0,6 - 6 mm |
| Bohrfutteraufnahme | B10 |
| Bohrleistung (Stahl, Alu, Holz) | 6 mm |
| Bohrtiefe | 40 mm |
| Ausladung | 165 mm |
| Säulendurchmesser 30 mm | |
| max. Abstand Bohrtisch - Bohrfutter | ca. 200 mm |
| Höhe | 470 mm |
| Abmessung Maschinenfuß | 275 x 165 mm |
| Schalldruckpegel | 72 db(A) |
| Gewicht | 15 kg |
| Artikel Nummer | 19900 |
| EAN-Code | 4026863199008 |
Drilling and milling machine for machining workpieces made of metal, plastic or similar materials.
The EFM 200 DS is specially designed for finger cutters up to ø 16 mm and face milling cutters up to ø 30 mm. The milling head can be tilted on both sides up to a maximum of 45°. This makes it easy to mill chamfers, angled surfaces or grooves. Due to the special fine feed on the milling head, the desired milling depth can be achieved very precisely. The height adjustment of the milling head is 180 mm. The work table can be moved 220 mm in the X-axis and 100 mm in the Y-axis.
For high forces in the lower speeds, two mechanical speed levels can be selected.
For machining non-ferrous metals and plastics, work can be carried out in the upper speed range up to 2200 min-1.
The control is decisive for the performance of a machine tool. Therefore, there are no compromises with the EFM 200 DS. The speed electronics, developed and produced by the German manufacturer Telegärtner, ensure powerful running at all speeds.
| Nennspannung | 230 Volt~ / 50 Hz |
| Leistungsaufnahme | 350 W |
| Arbeitstisch (LxB) | 390 x 95 mm (mit 12 mm T-Nuten) |
| max. Tischverstellung x-Achse | 220 mm |
| max. Tischverstellung y-Achse | 100 mm |
| max. Höhensverstellung | 180 mm |
| max. Neigungswinkel | -45° bis +45° |
| Drehzahlbereich I | stufenlos 150 - 1.100 min-1 |
| Drehzahlbereich II | stufenlos 300 - 2.500 min-1 |
| Zahnkranzbohrfutter | 1 - 13 mm |
| max. Fingerfräserdurchmesser | 16 mm |
| max. Stirnfräserdurchmesser | 30 mm |
| Morsekegel der Arbeitsspindel | MK 3 |
| Versandgewicht | ca. 57 kg |
Drilling and milling machine for machining workpieces made of metal, plastic or similar materials.
The EFM 200 BLplus is a further development of the EFM 200 DS and differs mainly in that it has a more powerful brushless motor and a larger cross table (460 x 120 mm).
The new milling motor eliminates the somewhat noisy gearbox for changing the speed levels. It is replaced by a quiet and hard-wearing belt drive, which is characterised by much smoother running. This makes the machine even more maintenance-free and less prone to breakdowns.
It is specially designed for finger cutters up to ø 16 mm and face cutters up to ø 30 mm. The milling head can be swivelled on both sides up to a maximum of 45°. This makes it easy to mill chamfers, angled surfaces or grooves. Due to the special fine feed on the milling head, the desired milling depth can be achieved very precisely. The height adjustment of the milling head is 180 mm. The work table can be moved 300 mm in the X-axis and 130 mm in the Y-axis.
| Nennspannung | 230 Volt~ / 50 Hz |
| Leistungsaufnahme | 500 W |
| Arbeitstisch (LxB) | 460 x 120 mm (mit 12 mm T-Nuten) |
| max. Tischverstellung x-Achse | 300 mm |
| max. Tischverstellung y-Achse | 130 mm |
| max. Höhensverstellung | 180 mm |
| max. Neigungswinkel | -45° bis +45° |
| Drehzahlbereich | stufenlos 100 - 2.500 min-1 |
| Zahnkranzbohrfutter | 3 - 13 mm |
| max. Bohrleistung | 16 mm |
| Fräsleistung Schaftfräser | 20 mm |
| Fräsleistung Stirnfräser | 45 mm |
| Morsekegel Arbeitsspindel | MK 3 |
| Abmessungen (B x H x T) | ca. 520 x 760 x 580 mm |
| Gewicht | ca. 60 kg |